More Progress
Comments Off on More ProgressExterior:
Our little “garden bed” by the stairs had been overtaken by weeds (all that rain doesn’t only help the wanted plants after all!). A short while ago we had to remove the lavenders because they were drowning in that location. Lavender likes a dry, sunny location and based on the flooding in that area the earth was generally very moist. At first it flourished, then it wasn’t doing to well, so we moved it. In place the weeds grew ever so quickly…
Since we knew better than to place dry-loving plants back into that spot we went on a hunt for moist-loving plants. We found a variety of Hostas and covered the general area with mulch…in hopes to keep some of those weeds from coming back so quickly.
In the meanwhile we have also harvested our first batch of home grown veggies- all of two squashes and one green bell pepper! We proudly cooked a veggie pasta dish for one of our friends (with the aide of a store bough red bell pepper and zucchini).
Another area we tackled was by the shed. While purchasing the Hostas Patrick discovered another ornamental grass that he had to have.
So we moved what we assume to be wildly growing lilies (they never bloomed this year, so we’re not 100% sure) and extended the rose bed. In the fall (or spring?) I’d like to plant a few more roses to fill the open spaces.
Interior:
In the meanwhile we’ve also gotten around to a little bit more interior work…
The kitchen built-in started looking out something like this…
…progressed with the comfort of the dining room floor, starting out with the scraper/razor blade, getting frustrated and moving to the heat gun (which is dangerous in itself because it can make the glass break, but broken glass is easier to replace than damaged wood)…
…and ending with something like this (for the moment).
We then worked a little bit more on the dining room door. This is where we had left off January 6th. Wow, look at that floor too! Not quite refinished yet.
And this is where we got rid of the majority of the remaining paint. We are still struggling to find the best solution of getting the paint off the detail work – anybody have any suggestions? Pleeeeaaaase? :)
Comments are closed